Imagine my surprise when, after 13 years of living in Minnesota and being told that a handrail needs to be an inch and a half away from a wall, I learned that the Louisiana State ﬁre marshal not only enforces accessibility AND life safety but requires the handrail to be two and a quarter inches away from the wall!
“Lynn, meet the NFPA 101.” (a book I had never opened before)
Amidst my amazement that a State enforced something other than the series of International [insert trade here] Codes with its own series of amendments, I decided to ﬁnd out who else has adopted the NFPA 101 as its life safety code. Turns out, not that many do and with no particular regional bent (see map below).
Needless to say, I’m looking forward to attending a day-long seminar in Kenner on January 26th, called “Building Codes in Louisana.” I have a lot to learn
NFPA 101 (2006)
22.214.171.124.4.5 New handrails shall be installed to provide a clearance of not less than 2 ¼ in. (57 mm) between the handrail and the wall to which it is fastened.
Commentary: In earlier editions of the Code, a minimum 1 ½ in. (38 mm) clearance was required between a new handrail and the wall to which it was fastened. The current provision, as detailed in 126.96.36.199.3.4, increases the required minimum clearance to 2 ¼ in. (57 mm) for new handrails in recognition of the fact that 1 ½ in. (38 mm) is an inadequate clearance for both a normal grasp and an emergency grasp of the handrail.
The Wagner Companies “Clarifying Bracket Clearance” (date of publication unknown)
“The 2004 ADAAG — presently still making its way through the Federal approval process — now requires a 1-1/2″ minimum, as does the ICC, IRC and ANSI A117.1. Though the original ADAAG is still being applied across the country, the Access Board’s position is that the new ADAAG reﬂects their response to questions regarding accessibility and should supercede the 1992 guidelines.”